小型安庆S11变压器闭锁装置的基本功能与使用条件-KS13矿用变压器资讯-安庆巨能油浸式变压器厂

金陵棋牌

欢迎来到安庆巨能油浸式变压器厂官网!

安庆巨能油浸式变压器厂性能优越 价格合理 质量有保证
全国咨询热线:19954214499
您的位置:金陵棋牌>>安庆KS13矿用变压器>>KS13矿用变压器资讯

小型安庆S11变压器闭锁装置的基本功能与使用条件

作者:发布时间:2019-04-20 45 次浏览

小型安庆S11变压器闭锁装置的基本功能与使用条件

Basic functions and use conditions of small switchgear closet in Guiyang

安庆S11变压器">为了确保小型安庆S11变压器不受外界因素的干扰,厂家通常都会为其配备相应的闭锁装置,但并非任意闭锁装置都适用于安庆S11变压器的,还必须满足一系列的技术要求,包括了安庆S11变压器闭锁装置的功能、使用方式等。

In order to ensure that the small switch cabinet without the interference of external factors, manufacturers are usually equipped with corresponding locking device for it, but not any locking device are suitable for switch cabinets, you must also meet the requirements of a series of techniques, including the switch cabinet locking device function, the way of use.


安庆S11变压器提醒既然要为小型安庆S11变压器设置闭锁装置,那么它至少要具备五防功能,除防止误分、误合断路器可采用提示性的措施外,其他四防应采用强制性闭锁,从而减少不利因素对它造成的干扰。

Guiyang switchgear reminded to set the lock device since small switch cabinet, it should at least have five functions, in addition to prevent error, error closing circuit breaker can adopt prompt measures, the other four case should adopt mandatory locking, thereby reducing the adverse factors caused by interference on it.


同时还要保证采用规定的程序来操作小型安庆S11变压器闭锁装置,一方面是为了确保人员在操作安庆S11变压器时的安全,同时也是为了保证安庆S11变压器不受损坏。一般情况下,尽可能采用机械闭锁,这种方式比较简单、可靠、操作维护方便。

At the same time, it is also necessary to ensure the use of the prescribed procedures to operate the locking device of the small switch cabinet, on the one hand, to ensure the safety of the staff while operating the switchgear, and also to ensure that the switchgear is not damaged。http://yuanzhou。nmbcp。com/ In general, mechanical locking is used as much as possible。 This method is simple, reliable, and easy to operate and maintain。


如果小型安庆S11变压器使用的就是机械闭锁,那么机械程序锁应符合相关的金属要求,比如开启灵活、可靠、钥匙插、拔自如,无卡涩现象;进行非程序操作时,安庆S11变压器不得操作等。

If a small switchgear is mechanical lockout, mechanical program locks should conform to the relevant metal requirements, such as opening flexible, reliable, key inserting, pulling freely, and no card jam. During non program operation, switchgear shall not operate.


除了传统的机械闭锁之外,小型安庆S11变压器也可以采用电气闭锁技术,但要求闭锁元件的电源应与继电保护回路分开;而且闭锁回路和接点应满足闭锁要求;布线应合理等等。

In addition to traditional mechanical lockout, small switchgear can also adopt electric locking technology, but the power supply of blocking elements should be separated from relay protection circuit. Besides, locking circuit and contact should meet the requirements of locking, wiring should be reasonable and so on.


http://www.gzssddl.com/news/235.html 相关标签:安庆S11变压器
  • 上一条 没有了
  • 下一条 没有了
返回列表 本文标签:
平安彩票 金誉彩票注册 平安彩票 千禧彩票技巧 金誉彩票投注 千禧彩票是真的吗 456棋牌 内蒙古快三走势图 吉林快3 易发彩注册